105B Industrial O Ring Mechanical Seal 18mm 90mm High Temperature
Mechanical Seal Type 105B Industrial Pump O-Ring Seal Mechanical
Seal
Basic Info.
Model NO.
Metal bellows seal
Manifold Pump Seal
105B Seal
Grundfos Pump Seal
Rubber Bellow Seal
Che Pump Seal
Mechanical Seal
Industrial Pump
Oil pump seal
ABS Pump Seal
Blackmer Seal
Food pump seal
CAR/SIC/TC/
Automotive pump seal
Skeleton oil seal
Specification
18mm and 90mm
Basic Features
| Structure: Single End |
| Pressure: Medium Pressure Mechanical Seals |
| Speed: General Speed Mechanical Seal |
| Temperature: High Temperature Mechanical Seal |
| Performance: Wear |
| Standard: DIN24960, ISO3069, GB6556-94 |
| Model NO.: Type 105B |
| Balance: Unbalanced |
| Specification: Inner Diameter: 18 mm to 160 mm |
Product Detailed Description
Type 105B Mechanical Seal for Clean Water Pumps, Circulating Pumps
and Vacuum Pumps
1. Structural Features: single end, unbalanced, fixed direction of rotation, touched coil
spring transmission. This component has a touched coil spring so
you need to pay attention to the shaft rotating direction.
2. Industrial Standards: DIN24960, ISO3069, GB6556-94
3. Scopes of Application: widely used in many types of chemical pumps and clean water pumps.
Operation Parameters:
| ressure: 0.8 MPa or less |
| Temperature: - 20 ~ 220 ºC |
| Linear Speed: 15 m/s or less |
| Materials: |
| Rotary Ring: Carbon/SiC/TC |
| Stationary Ring: SiC/TC |
| Elastomers: NBR/EPDM//Aflas/PTFE/FFKM |
| Springs: SS304/SS316 |
| Metal Parts: 410S/SS304/SS316/SS316L |
Mediums: weak acid, weak alkalis, water and solvents.
We are a manufacturer. All seals have bulk inventory and can be
shipped to you quickly. We promise to ship you in small quantities
within 3 days.Advanced technology, excellence, replace original
| 1. Different models of mechanicals seals for a wide variety of
Grundfos® pumps, among them: CR(N), NB, NK, CLM, LP, TP, etc.
Available in diverse combinations of materials and different
diameters: 12, 16, 22, 28, 33, etc. Also mechanical seals for
Sarlin®. Division of waster pumps. Available in various materials:
silicon-graphite carbide, silicon carbide-silicon carbide; combined
with EPDM and FKM elastomers. |
2. Mechanical seals are available for different references
Gorman-Rupp® pumps. Special models for the transfer of clean water,
sewage, oil industry, agriculture and others.
GRN-38'1 |
| 3. Mechanical seals for Fristam® pumps. Wide range of models and
materials in the most standard diameters: 22,30 and 35 mm.
Different assembly possibilities for the most well-known pump
models: FP, FL and FT. |
| 4. Mechanical seals for all types of Calpeda® pumps: centrifugal
pumps, multistage, submersible. Different models of mechanical
seals in a wide range of materials. |
| 5. Mechanical seals compatible for APV® pumps, among them: Puma,
ZMA, ZMB, ZMD, ZMS, ZMH, ZMK. Rosista® and Pasilac®, W and W+. Some
designs with wave spring like the special seals for APV Howard®
pumps and Crepaco Clean Line®. All of them have been manufactured
in materials suitable for working with fluids such as juices, milk
and drinks in general. |
| 6. Allweiler, Simple design of mechanical seals simple but with
special measures for this type of pump. |
| 7. Different models of mechanical seals compatible for Alfa-Laval®
pumps series CM, FM, MR, LKH,GM and ALC. Also the models for the
range of lobular SSP and SR pumps. Mechanical seals in different
combination of materials tungsten carbide, silicon carbide,
graphite; combined with different types of elastomers: NBR, EPDM
and FKM. |
| 8. Mechanical seals for ABS® submergible pumps specific wastewater
treatment. Different models of mechanical seal available: oil
chamber mechanical seal and water mechanical seal. |
Fixing and Applying Directions of Mechanical Seals
1) Select Appropriate mechanical seal to match the materials
according to work conditions and host machine equipment.
2) The radial acting deviation for the shaft(shaft sleeve) of the
installed mechanical seal shall be 0.04mm by maximum
while the axial movement value of the rotor shall be no more than
0.1mm.
3) The seal cover (or shaft cover) of the stationary ring of the
installed mechanical seals,the vertical degree of the seal
face should be 0.04mm by maximum.
4. When conveying medium of over high or low temperature,with
medium which are easy catch fire,easy for explosion.
Related mechanical seal standards must be referred to take
appropriate measures such as quench,rinsing,coolong and
filtrating.
5. Appropricate lubrication must be choosen when mechanical seal is
installed.The installment size of the mechanical
seal must be guaranteed to the installment instruction.
6. Before the machine starts running,the hermetic compartment shall
be full of medium and well lubricated.Dry friction
which may lead to the damage of the air-tightness is strict
forbidden.
Question: Where is your factory located? How can I visit
there?
Answer: Our factory is located in Guangzhou, China. You
can fly to Guangzhou airport directly. All our clients,
from home or abroad, are warmly welcome to visit us!
Question : How does your factory do regarding quality control?
Answer: Quality is priority. We always attach great importance to
quality controlling from the very beginning to the very end.
